The ratings of 17 Oil and Gas stocks are down this week, according to the Portfolio Grader database. Each of these rates a “D” (“sell”) or “F” overall (“strong sell”).
Phillips 66 (NYSE:) is on the decline this week, earning a D (“sell”) after receiving a C (“hold”) last week. Phillips 66 is an advantaged downstream energy company. It operates through the following businesses segments: Refining and Marketing, Midstream and Chemicals. The Refining and Marketing segment purchases, refines, markets and transports crude oil and petroleum products in the United States, Europe … In Portfolio Grader’s specific subcategories of Earnings Growth and Earnings Revisions, PSX also gets F’s. .
Best China Stocks To Own For 2015: Chart Industries Inc (GTLS)
Chart Industries, Inc., incorporated on June 25, 1992, is an independent global manufacturer of engineered equipment used in the production, storage and end-use of hydrocarbon and industrial gases. The Company supplies engineered equipment used throughout the global liquid gas supply chain. It operates in three segments: energy and chemicals (E&C), distribution and storage or (D&S), and biomedical. The E&C and D&S segments manufacture products used primarily in energy-related and general industrial applications, such as the separation, liquefaction, distribution and storage of hydrocarbon and industrial gases. Through its BioMedical segment, it supplies cryogenic and other equipment used in the storage and distribution of biological materials and oxygen, used primarily in the medical, biological research and animal breeding industries.
The Company�� products, including vacuum insulated containment vessels, heat exchangers, cold boxes and other cryogenic components, are used throughout the liquid gas supply chain for the purification, liquefaction, distribution, storage and end-use of hydrocarbon and industrial gases. It is a manufacturer of standard and engineered equipment primarily used for low-temperature and cryogenic applications. The Company�� primary customers are multinational producers and distributors of hydrocarbon and industrial gases and their suppliers. The Company sells its products and services to more than 2,000 customers worldwide.
Energy and Chemicals Segment
The Company is a designer and manufacturer of cryogenic brazed aluminum and air cooled heat exchangers. The Company�� brazed aluminum heat exchangers are incorporated into assemblies and cold boxes to facilitate the progressive cooling and liquefaction of air or hydrocarbon mixtures for the subsequent recovery or purification of component gases. In hydrocarbon processing industries, its brazed aluminum heat exchangers allow producers to obtain purified hydrocarbon by-products, such ! as methane, ethane, propane and ethylene, which are commercially marketable for various industrial or residential uses. In the industrial gas market, its brazed aluminum heat exchangers are used to produce high purity atmospheric gases, such as oxygen, nitrogen and argon, which have diverse industrial applications. The Company�� air cooled heat exchangers are used in multiple markets to cool fluids to allow for further processing or to provide condensing of fluids, including hydrocarbon, petrochemical, natural gas processing, and power generation. Its compact Core-in-Kettle heat exchangers are designed to replace shell-and-tube exchangers, offering significantly more heat transfer surface per unit volume and improving the efficiency of chillers, vaporizers, reboilers and condensers in hydrocarbon applications including ethylene, propylene and LNG.
The Company is a designer and fabricator of cold boxes. Cold boxes are engineered systems used to reduce the temperature of gas mixtures to the point where component gases liquefy and can be separated and purified for further use in multiple industrial, scientific and commercial applications. In the hydrocarbon processing industry, its cold box systems are used in natural gas processing and in the petrochemical industry. In the industrial gas industry, cold box systems are used to separate air into its atmospheric components, including nitrogen, oxygen and argon, where the gases are used in a diverse range of applications, such as metal production and heat treating, enhanced oil and gas production, coal gasification, chemical and oil refining, the quick-freezing of food, wastewater treatment and industrial welding. The construction of a cold box system generally consists of one or more brazed aluminum heat exchangers and other equipment packaged in a box consisting of a structural metal frame encasing a complex system of piping, valves and instrumentation.
The Company designs and manufactures of engineered hydrocarbon process syst! ems speci! fically for those markets requiring cryogenic processing technology. These Concept-to-Reality process systems incorporate many of Chart�� core products, including brazed aluminum heat exchangers, Core-in-Kettles, cold boxes, vessels, pipe work and air cooled heat exchangers. These systems are used for global LNG projects, including projects in the United States and China for both domestic LNG production for diesel displacement and in the conversion of LNG import terminals to export terminals, and also for use in global nitrogen rejection units (NRU) and propane dehydrogenation (PDH).
Distribution and Storage Segment
The Company is a supplier of cryogenic equipment to the global bulk and packaged industrial gas industry as well as for energy-related applications. Its products span the entire spectrum of industrial gas demand from small customers requiring cryogenic packaged gases to large users requiring custom engineered cryogenic storage systems. Its products in the D&S segment include Cryogenic Bulk Storage Systems, Cryogenic Packaged Gas Systems, Cryogenic Systems and Components, LNG Applications, Beverage Liquid CO2 Systems, and Cryogenic Services. The Company is a supplier of cryogenic bulk storage systems (stationary tanks, trailers, and ISO tanks) of various sizes ranging from 500 gallons to 250,000 gallons. End use customers for its cryogenic storage equipment include industrial gas producers and distributors, chemical producers, manufacturers of electrical components, health care organizations, food processors and businesses in the oil and natural gas industries.
The Company is supplier of cryogenic packaged gas systems of various sizes ranging from 160 liters to 3,000 liters. Cryogenic liquid cylinders are used extensively in the packaged gas industry to allow smaller quantities of liquid to be easily delivered to the customers of industrial gas distributors on a full-for-empty or fill-on-site basis. Principal customers for its liquid cylinders are th! e same gl! obal industrial gas producers and the North American industrial gas distributors who purchase its cryogenic bulk storage systems. It has developed two technologies in the packaged gas product area: ORCA Micro-Bulk systems and Tri-fecta Laser Gas assist systems. ORCA Micro-Bulk systems bring the ease of use and distribution economics of bulk gas supply to customers formerly supplied by high pressure or cryogenic liquid cylinders. The Tri-fecta Laser Gas assist system was developed to meet the assist gas performance requirements for new high powered lasers being used in the metal fabrication industry. The Company�� line of cryogenic components, including VIP, engineered bulk gas installations, specialty liquid nitrogen (LN2), end-use equipment and cryogenic flow meters are recognized in the market for their reliability, quality and performance. These products are sold to industrial gas producers, as well as to a diverse group of distributors, resellers and end users.
The Company supplies cryogenic solutions for the storage, distribution, vaporization, and application of LNG. LNG may be utilized as a primary source of heat or power at industrial or residential complexes located away from a natural gas pipeline. LNG may also be used for peak shaving or as a backup supply at remote locations. It refers to its LNG distribution products as a Virtual Pipeline as the natural gas pipeline is replaced with cryogenic distribution to deliver the gas to the end user. It supplies cryogenic trailers, bulk storage tanks, tap-off facilities, and vaporization equipment specially configured for LNG into Virtual Pipeline applications. LNG may also be used as a fuel to power vehicles or ships. The Beverage Liquid CO2 Systems product line consists primarily of vacuum insulated, bulk liquid CO2 containers used for beverage carbonation in restaurants, convenience stores and cinemas, in sizes ranging from 100 pounds to 750 pounds of liquid CO2 storage. It also manufactures and market non-insulated, bulk fountain ! syrup con! tainers for side-by-side installation with its CO2 systems. Its beverage systems are sold to national restaurant chains, soft drink companies and CO2 distributors. Its primary competitors for bulk liquid CO2 beverage delivery systems are Taylor-Wharton and other producers of high-pressure gaseous CO2 cylinders. The Company operates locations in the United States and Europe providing installation, service, repair and maintenance of cryogenic products, including storage tanks, liquid cylinders, cryogenic trailers, cryogenic railcars, cryogenic pumps, cryogenic flow meters and VIP.
BioMedical Segment
The Company�� BioMedical segment consists of various product lines built around its core competencies in cryogenics and pressure swing adsorption, but with a focus on the respiratory and biological users of the liquids and gases instead of the large producers and distributors of cryogenic liquids. Its products in the BioMedical segment include Respiratory Products, Cold Storage Systems, and Commercial Oxygen Generation Systems. Its respiratory oxygen product line consists of a range of medical respiratory products, including liquid oxygen systems and ambulatory oxygen systems, both of which are used primarily for the in-home supplemental oxygen treatment of patients with chronic obstructive pulmonary diseases, such as bronchitis, emphysema and asthma.
The Cold Storage Systems product line consists of vacuum insulated containment vessels for the storage of biological materials. The primary applications for this product line include medical laboratories, biotech/pharmaceutical, research facilities, blood and tissue banks, veterinary laboratories, large-scale repositories and artificial insemination, particularly in the beef and dairy industry.
The Company competes with Linde, Sumitomo, Kobe, Fives, Linde, Air Products, Praxair, Air Liquide, Taylor-Wharton International or Taylor-Wharton and CVA/INOX, Taylor-Wharton and Beijing Tenhai Industrial Cylinders, Acme Cr! yogenics,! Vacuum Barrier Corporation, and Ind-Burma Petroleum Company.
Advisors' Opinion:- [By Seth Jayson]
Chart Industries (Nasdaq: GTLS ) is expected to report Q1 earnings on April 25. Here's what Wall Street wants to see:
The 10-second takeaway
Comparing the upcoming quarter to the prior-year quarter, average analyst estimates predict Chart Industries's revenues will increase 32.2% and EPS will increase 39.6%. - [By Jake L'Ecuyer]
Top losers in the sector included Chart Industries (NASDAQ: GTLS), Jacobs Engineering Group (NYSE: JEC), and ABB (NYSE: ABB).
Top Headline
Merck & Co (NYSE: MRK) reported a 7% rise in its first-quarter profit. Merck's quarterly profit surged to $1.71 billion, or $0.57 per share, compared to a year-ago profit of $1.59 billion, or $0.52 per share. Excluding certain items, Merck earned $0.88 per share, up from $0.85 per share Its revenue dropped 4% to $10.26 billion versus $10.67 billion. However, analysts were estimating earnings of $0.79 per share on revenue of $10.43 billion. Merck reiterated its full-year earnings forecast of $2.15 to $2.47 per share.
Top 10 Machinery Stocks For 2014: Komatsu Ltd (KMTUY)
Komatsu Ltd. (Komatsu), incorporated in May 13, 1921, is a global company engaged in the manufacturing, development, marketing and sale of a range of industrial-use products and services. The manufacturing operations of Komatsu are conducted primarily at plants located in Japan, the United States, Brazil, the United Kingdom, Germany, Sweden, Italy, Indonesia, China, Thailand and India. Komatsu�� products are primarily sold under the Komatsu brand name and almost all of its sales and service activities are conducted through its sales subsidiaries and independent distributors who primarily sell products to retail dealers in their respective geographic area. Komatsu operates and competes in the six principal markets, such as Japan, the United States, Europe and Commonwealth of Independent States (CIS), China, Asia (excluding Japan and China) and Oceania and the Middle East and Africa. In May, 2009, Komatsu acquired the additional interest in Komatsu Australia Corporate Finance Pty. Ltd.
Construction, Mining and Utility Equipment
The Company offers various types of construction, mining and utility equipment, ranging from super-large machines capable of mining applications to general construction equipment and mini construction equipment for urban use. Komatsu�� range of products in this operating segment also includes a variety of attachments to be used with its products. Komatsu�� principal products include excavating equipment, loading equipment, grading and roadbed preparation equipment, hauling equipment, forestry equipment, tunneling machines, recycling equipment, industrial vehicles, other equipment, engines and components, casting products and logistics.
Industrial Machinery and Others
The Company�� Industrial Machinery and Others segment products are used by a range of businesses and include industrial machinery, such as forging and sheet metal machinery and other services. Komatsu�� principal products include metal forging and stampi! ng presses, sheet metal machines, machine tools, defense systems, temperature-control equipment and others.
The Company competes with Caterpillar Inc., Hitachi Construction Machinery Co., Ltd., Volvo Construction Equipment NV, CNH Global N.V., Hyundai Heavy Industries Co., Ltd., Doosan Infracore Co., Ltd. and Toyota Motor Corporation.
Advisors' Opinion:- [By Dan Carroll]
That doesn't mean you should rush headfirst into any old Japanese stock on the hopes of a nationwide surge; as with all investing, picking the best stocks is the way to go. The country's top exporters have seen their stock rise and fall with the yen's volatility, but leading manufacturers such as Kubota (NASDAQOTH: KUBTY ) and Komatsu (NASDAQOTH: KMTUY ) are poised to ride a weaker yen higher to better compete against foreign rivals.
- [By Dan Carroll]
Chinese manufacturing and materials stocks may not be the only picks in trouble, however. Leading international manufacturers could see demand in the world's second-largest economy, cutting into lofty growth expectations that relied upon China's surge to make up for weakness elsewhere around the globe. Japanese industrial power Komatsu (NASDAQOTH: KMTUY ) , the second-largest industrial machinery manufacturer in the world, is betting on�growing Chinese demand this fiscal year, in combination with the weak yen, to fuel growth.
- [By Nicole Seghetti]
Dumped
Japanese industrial manufacturer Komatsu (NASDAQOTH: KMTUY ) recently picked up market share in China by outcompeting rival Caterpillar on price. But Fisher probably dumped Komatsu stock based partly on the company's shrinking profits resulting from falling demand in Asian nations such as China and Indonesia�. - [By Dan Carroll]
Fellow Japanese manufacturer Komatsu's (NASDAQOTH: KMTUY ) shares have slid more than 3% this past month, but like Kubota, this stock has blown up in 2013 and could be headed higher with a win by Abe and the LDP. However, there's risk in Komatsu's lofty 45% profit growth outlook in 2013: The company's the top manufacturer in China, but given the current slowdown plaguing the second-largest economy on Earth, Komatsu investors could be left disappointed. Komatsu's likely to see a strong uptick for the full year due to the weak yen -- particularly if Abe moves more aggressively after the elections -- but China's slump could make meeting optimistic projections a tall order.
Top 10 Machinery Stocks For 2014: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion:- [By Damon Churchwell]
Lastly, a growth company�
The third example of a thriving flow technologies company is IDEX� (NYSE: IEX ) . This one is situated in a unique set of end markets, namely fluid & metering, health & science, and fire & safety/diversified.
Top 10 Machinery Stocks For 2014: Rofin-Sinar Technologies Inc (RSI)
Rofin-Sinar Technologies Inc., incorporated on July 19, 1996, is engaged in the designing, development, engineering, manufacturing and marketing of laser-based products used for cutting, welding and marking a range of materials. The Company offers a range of laser products and related services for three material processing applications: cutting, welding, and surface treatment (macro applications); marking, and fine cutting, fine welding, micro drilling, and micro structuring (micro applications). It provides a range of laser sources and laser-based system solutions to markets, such as the machine tool, automotive, semiconductor, electronics, and photovoltaic industries. Its product categories include Laser macro products, Laser marking products, Laser micro products and Components. The products are sold directly to end-users and to original equipment manufacturers (OEMs).
As of September 30, 2013, the Company had over 4,000 customers (including multinational companies with multiple facilities purchasing from the Company). During the year ended September 30, 2013 (fiscal 2013), approximately 38%, of the Company�� revenues related to sales of laser products for macro applications, approximately 13%, related to sales of components, and approximately 49%, related to sales of laser products for marking and micro applications.
LASER MACRO PRODUCTS
The Company�� carbon dioxide laser products for macro applications consist of DC Slab Series, SC Series, XL Series, STS Series, FH Series and SM Series. Its XL, STS, FH and SM Series fast-axial flow carbon dioxide lasers are used for both cutting and welding applications and are marketed under the PRC and NELC brand. XL, STS, FH, SM, FA, and PLS Series products are used primarily by the machine tool industry. Its SC Series diffusion cooled, wave-guide carbon dioxide lasers are developed and produced by Rofin-Sinar UK Ltd. The SC Series are sealed-off lasers, used for cutting and structuring applications. Markets for the! se include machine tool, electronics, and packaging industries. The Company�� DQ Series of Q switched, solid-state lasers are designed for applications, such as removal, cleaning and insulation of various materials in the automotive, consumer electronics and photovoltaic markets. The Company�� FL Series of high-brightness single or multi-mode fiber lasers use fiber optics as the active medium. These fiber lasers are used for cutting and welding applications, as well as for new applications, such as remote cutting. Its diode lasers are designed to meet the requirements of a range of welding, soldering and surface treatment applications.
LASER MARKING PRODUCTS
Rofin offers standardized and customized laser marking systems in different power ranges and wavelengths for use in various industrial segments. The Company�� standard PowerLine marking products consist of a range of lasers with output power from 2 watts to 100 watts with a galvo-head, a personal computer with processor, and Rofin�� VisualLaserMarker software. Special options and accessories include a double marking head allowing speeds of up to 1,600 characters per second in certain applications, as well as beam-switching and -splitting options for marking of products in multiple production lines using a single laser. It is used in the semiconductor and electronics industries. MultiScan vector scanning marker utilizes a 100 watts sealed-off carbon dioxide laser. It is used in marking of consumer goods in the packaging industry. LabelMarker Advanced is a laser-based system is Rofin�� solution. This laser system is used in any production area without additional safety requirements. The EasyMark is a transportable desktop device. The EasyMark offers a program-controlled z-axis and a rotary axis, which can optionally be integrated. An aluminum T-slot plate facilitates mounting of customer-specific work piece carriers. The EasyJewel is a transportable desktop device developed to mark jewellery. CombiLine Cube/CombiLi! ne Advanc! ed compact laser workstations have been designed for small and medium-size batches. NuQ pulsed fiber laser sources are produced and marketed under the Nufern brand and are designed for OEM customers and integrators.
LASER MICRO PRODUCTS
The Company markets and sells a range of laser products, including, pulsed, fiber and other solid-state lasers for various spot welding and fine cutting applications; carbon dioxide Slab lasers for perforating applications; Q switched, solid-state lasers for surface structuring, and diode lasers for soldering and plastic welding applications. The Company's manual welders for micro applications, which are sold under the name Performance Tool Open and Internal, consist of pulsed, solid-state lasers in the range of 60 watts to 200 watts, which are primarily used for fine welding applications in the medical device, jewelry and mold making industries. The StarPulse Series consists of pulsed Nd:YAG rod lasers with power ratings from 40 to 500 watts. These are designed for use in fine welding applications, such as laser welding of reflective materials in the medical device and electronics industry.
The StarFiber Series achieve nominal powers of 100 watts up to 600 watts. The lasers can be operated in either pulse-modulated or continuous wave mode. The StarFiber Series is designed for a range of applications for fine welding and fine cutting, such as welding of electromechanic components or fine cutting. The X-Lase Series consists of picosecond pulse mode-locked fiber laser systems with an output power of upto 24 watts. Markets are in the semiconductor, electronics and display industries. In these industries, the X-Lase products can be used for thin film patterning, ablation and scribing applications. Its StarFemto Series consists of femtosecond pulse mode-locked laser systems with a maximal output power of 5 watts. Main markets are medical implants and other fine cutting or structuring applications. The PerfoLas Systems consist of a carbo! n dioxide! laser in combination with a galvo scanning head and is used for precise cutting, drilling, and surface structuring.
The Universal Workstation (UW) and Modular Processing System (MPS) Series are modular laser-based systems that are designed to meet a variety of applications, including welding, cutting, surface modification and ablation. Depending on the application, the UW and MPS Systems can be equipped with different laser sources (femtosecond, fiber, diode, or solid-state laser) and modified for specific handlings. Series 800 are flash-lamp pumped, solid-state lasers sold to OEM customers, and system integrators for various micro and marking applications. Series LDP and LEP are diode pumped, solid-state lasers sold to OEM customers and system integrators for various micro and marking applications. Series LDPP are diode pulse-pumped Nd:YAG lasers that are designed to cut thin metals. Market is the medical devices industry. Series LFP are hybrid diode pumped, solid state, picosecond lasers that are produced and marketed under the Lee Laser brand and are sold to OEM customers and system integrators for various micro applications.
The COMPACT and MINI Diode Laser System Series are laser systems are available in a range of output powers and wavelengths, including fiber-coupled direct beam or line source solutions, and are engineered for utilization in industrial laser materials processing, mainly for plastic welding, soldering and brazing applications in the automotive, medical device and electronic industries. The KLS Series lasers are pulsed solid-state lasers which are used for fine cutting, drilling and scribing applications. The FLS Series are lamp pumped, pulsed, solid-state lasers with high peak power for deep penetration cutting, welding and drilling. SLS CL Series are pulsed Nd:YAG solid-state lasers with output powers in the range of 5 to 250 watts. The KLS 246, FLS, LFS and SLS CL Series are all manufactured by the Company's Switzerland-based subsidiary LASAG.
COMP! ONENT PRODUCTS
The Company offers power supplies for pulsed and continuous wave solid-state lasers, carbon dioxide lasers, diode lasers, as well as radio frequency (RF) generators for acousto-optic Q-switches through its wholly owned subsidiary PMB Elektronik GmbH. Fiber and Optics Technology are special fiber lasers, fiber coupling products and optical engines, for use in fiber lasers are manufactured and marketed by the Company�� Finland-based subsidiary Corelase Oy. Laser Diodes and Modules are high-power semiconductor components, such as high power, high-brightness laser diodes and modules are manufactured and marketed by the Company�� subsidiaries Dilas Diodenlaser GmbH, Dilas Diodelaser Inc., Dilas Diodelaser China and m2k-laser GmbH. Fibers, fiber components, beam splitters or switches and beam combiners designed for use in industrial lasers or as beam delivery systems are manufactured and marketed by Optoskand AB. Fibers and fiber laser technology components are developed, manufactured and marketed by Nufern, East Granby. The Company�� high-technology components are either integrated by other laser manufacturers into their products or are used for the Company�� own product portfolio.
The Company competes with Trumpf, GSI Group, Unitek Miyachi, Han's Laser, Fanuc, Synrad, Coherent, IPG, Laserline and Jenoptik.
Advisors' Opinion:- [By Greg Harmon]
The Fresh Market (TFM), has been rising off of a bottom in March. It recently went through a 'W' consolidation and jumped higher, but is now retesting the top of the 'W'. The relative strength index (RSI) has held the mid line during the pullback and remains bullish while the moving average convergence divergence indicator (MACD) is not as positive. A turn higher, back over 53.50 could be a catalyst for a long entry, but a fall under 52 sets a target for a measured move (MM) lower to 50. This stock does not report earnings until late August.
- [By Joon Choi]
Currently, the monthly relative strength indicator (RSI) reading is 83.7. (A reading over 70 is considered to be overbought.) To put this figure in perspective, the monthly RSI of the Nasdaq Composite was 85.9 on March of 2000 (the index peak), and we know what happened afterwards.
Top 10 Machinery Stocks For 2014: AB SKF (SKFRY.PK)
AB SKF, formerly SKF AB, is a global supplier of products, solutions and services within rolling bearings, seals, mechatronics, services and lubrication systems. The services provided by the Company include technical support, maintenance services, condition monitoring and training. The Company operates in three divisions: Industrial Division and Service Division, servicing industrial original equipment manufacturers (OEMs) and aftermarket customers respectively, and Automotive Division, servicing automotive OEMs and aftermarket customers. SKF operates in around 40 customer segments, including cars and light trucks, wind energy, railway, machine tool, medical, food and beverage and paper industries. In April 2009, the Company acquired the remaining 49% interest in SKF Polyseal.
In February 2008, the Company acquired QPMAerospaces�� metallic rods business. In October 2008, the Company acquired Cirval S.A Argentina. In November 2008, the Company acquired GLO s.r.l. Italy. In December 2008, the Company acquired the remaining 30% of the operations of SKF Automotive Bearings Company. In September 2008, the Company acquired PEER Bearing Company and its manufacturing units in the People�� Republic of China and Thailand.
Industrial Division
The Industrial Division serves industrial OEMs customers in some 30 global industry customer segments with a range of energy-efficient offerings. The solutions and know-how are based on the manufacturing of a wide range of bearings, such as spherical and cylindrical roller bearings, angular contact ball bearings, medium deep groove ball bearings and superprecision bearings, as well as lubrication systems, linear motion products, magnetic bearings, by-wire systems and couplings.
Service Division
The Service Division serves the global industrial aftermarket providing products and knowledge-based services for customers��plant asset efficiency. The solutions are based on SKF�� knowledge of bearings, sea! ls, lubrication systems, mechatronics and services, and customers are served by SKF and its network of over 7,000 authorized distributors. The division runs a network of Condition Monitoring Centres, which designs and produces global hardware and software. Service Division is also responsible for all SKF�� sales in certain markets.
Automotive Division
The Automotive Division serves manufacturers of cars, light trucks, heavy trucks, buses, two-wheelers and the vehicle service market, supporting them in bringing solutions to global markets. In addition, the division provides energy-saving solutions for home appliances, power tools and electric motors. Within the Automotive Division, SKF develops and manufactures bearings, seals and related products and services. Products include wheel hub bearing units, tapered roller bearings, small deep groove ball bearings, seals, and automotive specialty products for engine, steering and driveline applications. For the vehicle service market, the division provides complete repair kits, including a range of drive shafts and constant velocity joints.
Logistics Services
SKF�� business is supported by its logistics processes and systems, which involve all parts of the logistics needs in the supply chain. SKF Logistics Services provides warehousing, transportation, packaging and inventory management based on seamless information and communication technology for the SKF Group globally.
Advisors' Opinion:- [By Stephen Simpson, CFA]
I wrote on bearings and velocity control products company Kaydon (KDN) in early March of this year, and I didn't see a lot of value at the time. As the year went on, that call looked worse and worse, as the stock climbed about 18% - well above the S&P 500, and well above industry peers/competitors like Timken (TKR) and SKF (SKFRY.PK). To top it all off, Kaydon announced this morning (September 5) that it had received and accepted a buyout offer from SKF valuing the company at $35.50 - some 45% higher than the price when I thought it looked only about 10% undervalued. So what did I get wrong here, and what can investors do to avoid a similar mistake?
Top 10 Machinery Stocks For 2014: Rockwell Automation Inc.(ROK)
Rockwell Automation, Inc. provides industrial automation power, control, and information solutions. It operates in two segments, Architecture and Software, and Control Products and Solutions. The Architecture and Software segment offers control platforms that perform multiple control disciplines and monitoring of applications, including discrete, batch and continuous process, drives control, motion control, and machine safety control; and products comprising controllers, electronic operator interface devices, electronic input/output devices, communication and networking products, and industrial computers. This segment also offers software products, such as configuration and visualization software used to operate and supervise control platforms, advanced process control software, and manufacturing execution software to enhance manufacturing productivity and meet regulatory requirements; and rotary and linear motion control products, and sensors and machine safety components . The Control Products and Solutions segment provides low and medium voltage electro-mechanical and electronic motor starters, motor and circuit protection devices, AC/DC variable frequency drives, push buttons, signaling devices, termination and protection devices, relays and timers, and condition sensors; and packaged solutions, such as configured drives and motor control centers to automation and information solutions, as well as life-cycle support services. The company sells its products, solutions, and services primarily under the Rockwell Automation, Allen-Bradley, A-B, and Rockwell Software brand names to the food and beverage, transportation, oil and gas, metals, mining, home and personal care, pulp and paper, and life sciences markets through independent distributors and direct sales force in the United States, Canada, Europe, the Middle East, Africa, the Asia Pacific, and Latin America. Rockwell Automation, Inc. was founded in 1928 and is headquartered in Milwaukee , Wisconsin.
Advisors' Opinion:- [By Rich Duprey]
Industrial automation specialist�Rockwell Automation� (NYSE: ROK ) �announced yesterday�its third-quarter dividend of $0.52 per share, the same rate it paid last quarter after raising the payout almost 11% from $0.47 per share.
- [By David Sterman]
So which companies are likely to most greatly benefit from an eventual rise in capital spending? Firms involved in construction, business process automation, and other productivity tools. Here's a short sample, though you should keep an eye out for any companies that have a high level of sensitivity to changes in capital spending levels.
1. Rockwell Automation (NYSE: ROK) This maker of factory automation systems has managed to boost sales less than 10% from fiscal 2008 to fiscal 2012. Yet management hasn't been waiting around for business to improve. In that time, Rockwell has been investing hundreds of millions in its Logix Automation control platform, an open-source software system that enables all components of a production process control system to easily interoperate. Moreover, Rockwell's core strength in manufacturing has now been extended into the fields of energy refineries, mining, and food and beverage production.
Top 10 Machinery Stocks For 2014: Katy Industries Inc (KATY)
Katy Industries, Inc. (Katy) is a manufacturer, importer and distributor of commercial cleaning and storage products. The Company�� commercial cleaning products are sold primarily to janitorial/sanitary and foodservice distributors that supply end users, such as restaurants, hotels, healthcare facilities and schools. The Company�� storage products are primarily sold through home improvement and mass market retail outlets. Continental Commercial Products, LLC (CCP) is its wholly owned subsidiary and includes as divisions all of its business units. The Company�� business units are Continental, Contico, Container, Gemtex, Glit and Wilen. On October 4, 2011, the Company sold all assets and certain liabilities related to the DISCO division of CCP to DISCO Acquisition Corp. In February 2014, Katy Industries Inc completed the acquisition of Fort Wayne Plastics, Inc.
The Continental business unit is a plastics manufacturer and an importer and distributor of products for the commercial janitorial/sanitary maintenance, industrial and food service markets. Continental products include commercial waste receptacles, buckets, mop wringers, janitorial carts, and other products designed for commercial cleaning and food service. Continental products are sold under the brand names, such as Continental, Kleen Aire, Huskee, SuperKan, King Kan, Unibody, Tilt-N-Wheel, Wall Hugger, Collossus, Corner��Round, Rountop, Swingline, Kleen Tech and Structo Tuff.
The Contico business unit is a plastics manufacturer and distributor of home and tool storage products, sold primarily through home improvement and mass market retail outlets. Contico products include plastic home storage units, such as domestic storage containers, tool boxes, shelving and hard plastic gun cases and are sold under the brand names Contico and Tuffbin. Contico is a registered trademark used under license from Contico Manufacturing Limited.
The Container business unit is a plastics manufacturer and distributor ! of industrial storage drums and pails for commercial and industrial use. Products are sold under the Contico and Contico Container brand names.
The Gemtex business unit is a manufacturer and distributor of resin fiber disks and other coated abrasives for the original equipment manufacturer (OEM), automotive, industrial and home improvement markets. Gemtex products are sold under the brand names Trim-Kut and Grind R.
The Glit business unit is a manufacturer and distributor of non-woven abrasive products for commercial and industrial use and also supplies materials to various OEMs. Glit non-woven products include floor maintenance pads, hand pads, scouring pads, specialty abrasives for cleaning and finishing, growth medium and roof ventilation products. These products are sold primarily in the commercial sanitary maintenance, food service, industrial and construction markets under the brand names, such as Glit, Kleenfast, Glit/Microtron, Fiber Naturals, Blue Ice, Brillo, Cyclone, Cyclone D, Sponge Pro, Wipe Clean Pro, Joey, Jackeroo, Buckaroo, Cocopad, Safire and WalnutPad. Brillo is a registered trademark used under license from Armaly Brands, Inc. and BAB-O is a registered trademark used under license from Fitzpatrick Bros., Inc.
The Wilen business unit is a manufacturer, importer and distributor of professional cleaning products that include mops, brooms, brushes and plastic cleaning accessories. Wilen products are sold primarily through commercial sanitary maintenance, industrial and food service markets, with some products sold through consumer retail outlets. Products are sold under the brand names, such as Wilen, Wax-o-matic, Rototech, ErgoWorx and Derma-Tek.
Advisors' Opinion:- [By Chris Mydlo]
The guru, Mario Gabelli, purchased 724,729 shares of Katy Industries (KATY). According to the 13D filed with the SEC on March 21, 2014, Gabelli is deemed to have beneficial ownership of the securities owned by Gabelli Funds, GAMCO, Teton Advisors and MJG Associates. The total amount of shares owned is 1,711,045, representing 21.52% of the shares outstanding. Katy engages in the manufacture, import and distribution of commercial cleaning and storage products for commercial janitorial/sanitary maintenance, industrial, foodservice, mass merchant retail and home improvement markets in the U.S., Canada and Europe.
No comments:
Post a Comment